Showing posts with label Tea Party Stamp Set. Show all posts
Showing posts with label Tea Party Stamp Set. Show all posts

Tuesday, September 2, 2014

Tea Party Friendship Card

 I'm starting off September with a sketch challenge by the Paper Craft Crew PCCCS107 and a Colour Challenge by Create with Connie and Mary CCMC318.

Here's The Sketch:
 Here's the Colour Challenge:




Here's My Card:


Supplies:
Stamp Set: Tea Party, Friend To Friend (R)
Ink and Markers:  Basic Gray, Pool Party, Hello Honey
Card Stock:  Basic Gray, Pool Party, Hello Honey
DSP:  All Abloom
Accessories:  Oval Collection Framelit Dies, Big Shot, Perfect Polka Dots and Delicate Designs Embossing Folders, Basic Rhinestones, 3/8" Basic Gray Taffeta Ribbon (R), Trimmer 

I have to apologize for this fuzzy picture of the inside of the card.   I'm embarrassed that it's not in focus, however I think you can tell enough through the blurriness that I coloured the flower vase with markers.  The sentiment is from a retired stamp set called Friend to Friend. 

I love using the Tea Party Stamp set and trying different colour combinations with the main image.  For this one I stamped the image twice - once in basic gray, and a second time in Hello Honey ink.  I then fussy cut around the central part of the image and glued it to the basic gray one.  I used Tom Bow glue so I had a little bit of lee way in making sure that the Hello Honey image centered perfectly.  
This versatile collection of five stamps comes in Wood or Clear Mount, and coordinates with the Oval Framelits, Large Oval Punch, Large Tag Punch.  Great value for the money!
Because the Oval Collection Framelits are not true nestabilities with a 1/4" or less between ovals, I wound up fussy cutting around both the stamped images.  This enabled me to layer them onto the Hello Honey oval.
 
I added three rhinestones in various sizes from medium to large in the left hand corner of the image to comply with the sketch.  There are also a couple of other rhinestones on the circular designs in each of the corners.........just can't get enough bling!  

Well that's it for today folks.  I hope you enjoyed this card and will stop at the challenge sites to check out all the great cards that've been posted.  I'm leaving you with one last look at my card.




HAPPY STAMPING!
PENNY TOKENS  
03/09/14  Post Script: I just found out that I was one of the Top Three Picks for this card on Connie and Mary's Sketch Challenge CCMC318.  I hope you'll check out the fabulous cards made by the other two picks Julie and Laurie. 

This card also got me on the Artisan's Picks for the Paper Craft Crew challenge, which is awesome. I was honoured to be chosen along with Heidi Weaver and  Cynthia Richards who made awesome Halloween theme cards. Make sure you go and check out both sites.
 

Wednesday, August 21, 2013

Tutorial - Friendship Flip Card Using Thinlet Dies

Today I want to share a tutorial with you on this Flip Card I've made using the new Label Card Thinlits Dies.  The theme for this card is friendship and what could be more friendlier than a tea party!

Supplies Used:

Stamp Set:    Tea Party 129138
Card Stock:   Crisp Cantaloupe, Calypso Coral and Very Vanilla
DSP:             Venetian Romance 
Ink:              Calypso Coral 
Tools:           Big Shot Machine, Magnetic Platform, Label Card Thinlits, Labels Collection Die Cuts (the smallest label), Elegant Butterfly Punch, Perfect Polka Dots Embossing Folder, Oval from Oval Framelits.
Accessories:  Basic Pearls, 3/8 Ruffle Stretch Trim in Crisp Cantaloupe, Sticky Strip, Snail Adhesive, Sponge Dauber

Cutting Out the Card Base:
I personally like the look of the Flip Card when you use 8 1/2" card stock  instead of the recommended 5 1/2 x 6 size.  I like having the extra 2 1/2" of card stock to write on and when the card is closed, the message area is hidden behind the extra fold.  For me, that's really cool and I think it adds even more of a "wow" factor.  

STEP ONE CUTTING YOUR CARD BASE:

Cut a 5 3/8 x 8 1/2" piece of Crisp Cantaloupe card stock.  With the cutting edge of the Thinlits Die facing down, insert the card stock under the flip part of the die and extend the additional card stock over the top of the die.   
TIP:  Just a note about the width of the paper for this version of a Flip Card. if you have difficulty fitting it through the die, it may be just a smidgen too wide.  I found that when I cut my card stock at 5 1/2" and tried to fit the card stock through the die, it was crooked and wouldn't lay flat.  To remedy that and make sure that the finished card base was aligned properly with the die, I cut an additional 1/8" inch off the width.  As soon as I did that, the card stock fit perfectly through the die, and all was well.  So experiment with the size before you start on your actual card to make sure you have the right cut.

 
In this view you can see everything aligned perfectly, before I roll it through the Big Shot.  Make sure before you do any cutting on the new Magnetic Platform and on the regular platform, that you put down a standard plastic cutting pad.  Your sandwich from the base up should be:

1.  Magnetic Platform/or regular platform
2.  Standard Cutting Pad ( a flat one works best)
3.  Thinlit placed over single piece of card stock
4.  Standard Cutting Pad (a flat one works best)
 
When you take the card stock out of the Big Shot it will look like this. Although the picture is faint, you can see the fold lines for the flip portion of the card quite clearly.  There is also a fold line, albeit a faint one, 2 5/8" from the right side of the card.

STEP TWO:  FOLDING THE CREASE LINES
 
Fold the right hand side toward the center of the card and using your bone folder make a crease. Later on you'll add some card stock and designer paper to make this side of the card look terrific.


Fold the left side of the card towards the center from the second fold line and use your bone folder to make a crease.

Finally fold the first fold towards the card center and use your bone folder to run a crease down the fold.  The flip portion of the card will fold towards the center.

 
This is what your card will look like when everything is folded together.  It will be a perfect A2 size card.  Wasn't that easy?

STEP THREE:  DECORATING YOUR CARD 

Here are the basic elements for decorating this card.  You will need to cut a 2 1/2 x 5 2/8" piece of Calypso Coral card stock and a piece of Venetian Romance Designer Series Paper 2 1/4x 5 for the panel on the right hand side of the card.  Stamp the images from the Tea Party set in Calypso Coral ink on Very Vanilla card stock.  You'll need to cut two labels in Calypso Coral ink using the smallest label in the Label Collection Framelits.  Before assembling these pieces I used a sponge dauber to distress the edges of all the design pieces.
I embossed both side folds of the card with the Perfect Polka Dot Embossing Folder and left the center part of the card plain except for the stamped image of the teapot which is in Calypso Coral Ink.  In this view you can see the small label attached to the swing or flip part of the card.  I used the smallest label from the Label Collections Framelits set.  It fits perfectly. 

In this view I've attached the You're Just My Cup of Tea stamped image from the Tea Party set with dimensionals to the back of the Flip.  The image was stamped in Calypso Coral on Very Vanilla card stock.  I added a single basic pearl to the center of the flower at the top of the image.  Wow this card is really starting to come together!

In this view you can see how I've added the designer paper and Calypso Coral card stock to the front right fold.  I also added a strip of 3/8" Ruffle Stretch Trim in Crisp Cantaloupe. Before attaching the trim I ran a strip of Sticky Strip down the outside edge of fold.  This ribbon is so gorgeous and on this card adds just the perfect feminine touch.
 
I stamped a piece of Calypso Coral card stock with the Tea Party image before cutting it out with the Elegant Butterfly punch.  Four small basic pearls were attached in the center.  Before mounting the butterfly  to the front of the card, I used the bone folder to give some dimension to the wings.


In this picture you can see the front Flip with the Tea Party image added on top of the Calypso Coral label.  I cut this image out using the second oval in the new Ovals Collection Framelits........ perfect!  To add some interest I actually stamped this image twice and then hand cut out the Tea Party banner part of the image and attached it with dimensionals to the face of the image.  Three small basic pearls were spaced along the banner to emphasize the words. 



To finish the card I added a small strip of Calypso Coral card stock on the front left hand side of the card.  I think it adds some balance.

And that's all there was to assembling this very feminine friendship card.  I hope you enjoyed it and learned a little more about using the Label Card Thinlits.  

I'd love to hear your comments.  Thanks for dropping by! 


Tuesday, July 23, 2013

Be The Difference Convention Swaps - Tea Party Card

The "Be The Difference" Convention has come and gone, but  sharing my experience with you is just beginning.  Over the next few days I want to share some before, during and after experiences with you.  

To start, I'd like to share some pictures of my card prep for the awesome swap organized by Lori Souter and friends.  This was a 64+1 card swap and the theme was "New Catalogue Stamp Sets".  We were to receive one card for each new stamp set in the 2013-2014 catalogue. That's right 64 new stamp sets including hostess sets and wheels.

Unfortunately it didn't quite go as planned because of a mix-up in swapping times, due to a change in the Convention schedule.  It was unfortunate because I was really looking forward to being able to share all 64 cards with you.   

Regardless I'm blown away by the talent demonstrated in the cards I did receive.  And if over the coming weeks the ones I'm missing are posted, I'll provided some links so you can catch up on those ones too.  

So buckle your seat belts and come along for the ride, because I have some awesome swaps to share with over the coming week.  You're going to love them!

Here's My Tea Party Swap Card:

I made a total of 70 of these cards.  The numbers in the supply list below in brackets show the number of sheets of card stock it took to make these cards.

Supplies List:
  • Card stock:    Very Vanilla (35), Crumb Cake(19)
  • Ink:               Early Espresso and Crumb Cake
  • Stamp Set:     Cup of Tea
  • Accessories:
    • Stripes, Modern Mosaic Embossing Folders and Beautiful Wings Sizzlet, Big Shot Machine
    • Ovals Framelits
    • Large Tag Punch
    • Crumb Cake Taffeta Ribbon
    • Basic Rhinestones 
    • Adhesive, Sponge Dauber 
    • Sharp scissors for fussy cutting (a lot of that!)
 Pulling it together:
  
I tied 70 of these teeny little Crumb Cake Taffeta bows using the "fork method"There is virtually no waste when tying ribbon this way and you ensure all bows are uniform.


The little butterfly only needed a small scrap of card stock so I cut out some 1" x 8 1/2" strips of Crumb Cake and then cut these down into 1" strips.  As you'll see in the photo below, I adhered these butterflies to the tags using glue dots.  A small basic rhinestone was added for a little sparkle. 

I punched out 70 of the Large Tags from Crumb Cake card stock.  I stamped 70 of the Thank you  stamp images on Very Vanilla, then fussy cut them out and mounted them to the Crumb Cake with adhesive.  I re-stamped the Thank You image in Early Espresso Ink on Very Vanilla and then cut out just the "Thank You" banner and adhered these pieces to the tag.  Everything was then sponged with Crumb Cake ink. 

I stamped the Cup of Tea image in Crumb Cake ink onto the center of each of the Very Vanilla Layers using the Stamp-a-ma-jig to ensure the ovals were centered on the card, and then removed the ovals with the Oval Framelits Die.
Once the oval was removed this layer was embossed with the Modern Mosaic Embossing Folder.  I did all the sponge daubing with Crumb Cake ink prior to embossing the layers. 
I loved the shabby chic look of this layer once it was embossed.

I stamped the oval image in Early Espresso on Very Vanilla card stock and then fussy cut all the top and bottom designs away.  I mounted these onto the Crumb Cake oval with adhesive.  Basic Rhinestones were added to three of the circle flourishes on this element.  I was carefully when cutting away these pieces and as a result will be able to use the Cup of Tea images on another project.
I broke all the tasks into 7 groups of 10 pieces, so I could check to make sure I had enough of each element when I began to assemble the cards.  This photo shows a grouping of 10 tags, ovals, butterflies, ribbons and embossed pieces  ready to be put on the cards.

This picture shows my seven piles of card pieces.   Each pile consists of 10 of every layer and element used on the card.
This picture shows the 10 piles of completed cards prior to being placed in their plastic sleeves. 
 
Here you can see a closeup of the detail in the finished card.

The finished card. Ta Da!

Let me know what you think.



Zany Birthday FMS#628

Well another week has flown by and there's a promise of Spring between the rain drops.  I'm thrilled to see all the cherry trees sta...